LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Silverado 1500 SSV, RWD, Gas >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Driver Assistance Systems >> Repair Instructions >> Side Object Sensing Alert Module Bracket Replacement >> Installation Procedure

Installation Procedure

  1. GM5633653Courtesy of GENERAL MOTORS COMPANY

    Install the side obstacle detection control module (2) to the side object sensing alert module bracket (3).

    2. CAUTION:

    Refer to Fastener Caution .

  2. Side Object Sensing Alert Module Bolt (1) - Install and tighten - Fastener Specifications 
  3. GM5026575Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  4. Side Object Sensing Alert Module Bracket (2) - Install
  5. Rear Bumper Impact Bar Bolt (1) - Install and tighten [2x] - Fastener Specifications
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals