Radio Replacement

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Instrument Panel Lower Trim Panel Insulator Replacement Front Side Door Sill Garnish Molding Replacement
1	Radio Procedure Disconnect the electrical connectors. Reposition the right side front floor panel carpet away from the radio bracket to provide clearance to remove the radio from the bracket. Push tabs to release the radio from the bracket and slide downward. Refer to Control Module References for programming and set up information, if required.

Callout

Component Name

Preliminary Procedures

Instrument Panel Lower Trim Panel Insulator Replacement
Front Side Door Sill Garnish Molding Replacement

Radio

Procedure

Disconnect the electrical connectors.
Reposition the right side front floor panel carpet away from the radio bracket to provide clearance to remove the radio from the bracket.
Push tabs to release the radio from the bracket and slide downward.
Refer to Control Module References for programming and set up information, if required.