LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Equinox LS, FWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Starting System And Charging System >> Repair Instructions >> Battery Monitor Module Replacement (KL9) >> Installation Procedure

Installation Procedure

  1. GM4582272Courtesy of GENERAL MOTORS COMPANY

    Battery Monitor Module (2) - Install

    2. CAUTION:

    Refer to Fastener Caution

  2. Battery Negative Post Clamp Nut (1) - Tighten 4.5 N.m (40 lb in)
  3. GM4582267Courtesy of GENERAL MOTORS COMPANY

    Electrical Connector (2) - Connect

  4. Battery Negative Cable (3) - Install
  5. Battery Negative Cable Nut (1) - Tighten 9 N.m (80 lb in)
  6. Perform the battery sensor learn procedure. Battery Sensor Module Learn 
scientia non olet · About LEMON Manuals