Removal Procedure
- Raise and support the vehicle. Lifting and Jacking the Vehicle (Base) , or Lifting and Jacking the Vehicle (ZL1) , or Lifting and Jacking the Vehicle (Convertible)
Disconnect the electrical connector (2) from the electronic level sensor (1).
- Remove the right side rear suspension lower control arm cover. Rear Suspension Lower Control Arm Cover Replacement
Disconnect the level sensor link (1) from the lower control arm (4).
- Loosen the level sensor nut (3).
- Gently tap on the end of the level sensor nut (3) with a hammer enough to release the splined stud.
- Slide the level sensor (2) out of the keyhole slot and remove the level sensor (2) from the vehicle.