Circuit/System Verification
- Test drive the vehicle.
All sensors must show the same speed when driving in a straight line at a speed greater than 40 km/h (25 MPH).
- Verify the following parameters are within 40 km/h (25 MPH) of each other: Wheel Speed Sensor
- If not within 1.6 km/h (1 MPH) of each other
Refer to Circuit/System Testing
- Go to next step: If within 1.6 km/h (1 MPH) of each other
- If not within 1.6 km/h (1 MPH) of each other
- All OK.