Circuit/System Verification

Verify that DTC P0AA6, P1AE6, P1FFB, P1FFC, P1FFD, or P1FFE are not set.
- If DTC P0AA6 or P1AE6 is set
  Refer to DTC P0AA6 or P1AE6 .
- If DTC P1FFB, P1FFC, P1FFD, or P1FFE is set
  Refer to DTC P1FFB-P1FFE .
- Go to next step: If none of the DTCs are set

NOTE:

In order to clear P1FFF, the K114B Hybrid/EV Powertrain Control Module 2 may have to be programmed or replaced if the module contains the current calibration level.

Clear Codes. Verify DTC P0AA6, P1AE6, P1FFB, P1FFC, P1FFD, or P1FFE does not set.
- If any DTC is set
  Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Go to next step: If none of the DTCs are set
All OK.