Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Lower the sunroof module assembly. Refer to Sunroof Module Assembly Replacement .
Remove the sunroof window motor. Refer to Sunroof Window Motor Replacement .
Courtesy of GENERAL MOTORS COMPANY

Remove the sunroof housing drain gutter. Refer to Sunroof Housing Drain Gutter Replacement .
Courtesy of GENERAL MOTORS COMPANY

Remove the sunroof sunshade. Refer to Sunroof Sunshade Replacement .
Courtesy of GENERAL MOTORS COMPANY

Remove the rear drainage piece screw (1) and rear drainage piece (2).
Courtesy of GENERAL MOTORS COMPANY

Remove the front cover guide screw (1) and front cover guide (2).
Courtesy of GENERAL MOTORS COMPANY

Remove the locking slide buffer (1).
Courtesy of GENERAL MOTORS COMPANY

Use the flat tip tool push the drive wedge (1) to backward.
Courtesy of GENERAL MOTORS COMPANY

Remove the drive wedge (1) from locking slider (2) and the curve on panel assembly (3).
Courtesy of GENERAL MOTORS COMPANY

Hold the middle of curve on panel assembly (1). Raise the rear side of curve on panel assembly and push the curve on panel assembly to the forward.
Courtesy of GENERAL MOTORS COMPANY

Remove the curve on guide B (1). Push the rear side of curve on panel using flat tip tool.
Courtesy of GENERAL MOTORS COMPANY

Remove the curve on guide A (1).
Courtesy of GENERAL MOTORS COMPANY

Remove the locking slide (1).
Courtesy of GENERAL MOTORS COMPANY

Remove the retraction bar (1) and drive cable (2) from the sunroof frame.