Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
Position the junction block base (2) to the inner wheelhouse stud.
- Install the junction block base nut (1) and tighten to 9 N.m (80 lb in).
Install the junction block (2) to the base.
- Install the junction block bolts (1) and tighten to 9 N.m (80 lb in).
Position the positive battery cable to the junction block.
- Install the positive battery cable nut (1) and tighten to 5 N.m (44 lb in).
Install the junction block cover (1).
- Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
CAUTION:
Refer to Fastener Caution .