Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
Install the battery (1) into the battery tray.
- Install the battery bracket (3) and tighten the battery bracket bolt (2) to 9 N.m (80 lb in).
Install the battery positive cable (2) to the battery and tighten the battery positive cable junction block post nut (1) to 6 N.m (53 lb in).
Install the battery positive cable junction block cover (1).
- Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
CAUTION:
Refer to Fastener Caution .