Battery Positive Cable Junction Block Replacement

WARNING: This page is about a different car, the 2019 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection . Remove the battery positive cable terminal cover. If quipped, remove the engine control module (S53) from the battery tray. Engine Control Module Replacement
1	Body Wiring Harness Cable Connectors
2	Battery Positive Cable Terminal Nut CAUTION: Refer to Fastener Caution . Tighten 22 N.m (16 lb ft)
3	Battery Positive Cable Junction Block Nut Tighten 22 N.m (16 lb ft)
4	Battery Positive Cable Junction Block Nut from engine wiring harness junction block Tighten 9 N.m (80 lb in)
5	Battery Positive Cable Junction Block