LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Volt LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 349 (Battery, Starting System And Charging System) >> Repair Instructions >> Battery Negative Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4009336Courtesy of GENERAL MOTORS COMPANY
    WARNING:

    Refer to Battery Disconnect Warning .

    Remove the body wiring harness cable nut (1) and the body wiring harness cable (3).

  2. Remove the battery negative cable nut (2) and the battery negative cable (4).
  3. Remove the battery. Refer to Battery Replacement .
  4. GM4009328Courtesy of GENERAL MOTORS COMPANY

    Disconnect the body harness connector (1) from the battery current sensor (2).

  5. Remove the battery negative and positive cable ground nut (3) and the battery negative cable from the frame rail.
  6. GM4009329Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Note the orientation of the battery current sensor when removing.

    Remove the battery negative cable (1) from the battery current sensor (2).

scientia non olet · About LEMON Manuals