LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Trax Premier, AWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Wheel Stud Replacement >> Installation Procedure

Installation Procedure

  1. GM4368506Courtesy of GENERAL MOTORS COMPANY

    Position the NEW wheel stud (1) in the flange on the hub assembly.

  2. Install flat washers (2) and an OLD wheel nut (3) on the wheel stud.
  3. Use a suitable tool to prevent the flange on the hub assembly from rotating.
  4. Tighten the wheel nut until the wheel stud is firmly seated.
  5. Remove the wheel nut and flat washers.
  6. Front Wheel Bearing and Hub Assembly - Install - Front Wheel Bearing and Hub Replacement 
scientia non olet · About LEMON Manuals