Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Position the front strut assembly (1) on the vehicle.
Courtesy of GENERAL MOTORS COMPANY

Front Suspension Strut Bolt (2) - Install [2x]

CAUTION:

Front Suspension Strut Nut (1) - Install and tighten [2x] 110 N.m (81 lb ft)
Front Stabilizer Shaft Link @ Strut Assembly - Install - Stabilizer Shaft Link Replacement
Install any harnesses or hoses attached to the strut assembly.
Install the front tire and wheel assembly. Tire and Wheel Removal and Installation
Courtesy of GENERAL MOTORS COMPANY

Install the front suspension mount upper cup (2) and the front strut rod mount nut (1).
Courtesy of GENERAL MOTORS COMPANY

Use the CH-35669 wrench (2) and the appropriate hand tools to tighten the front strut rod mount nut to 65 N.m (48 lb ft).
Courtesy of GENERAL MOTORS COMPANY

Install the front suspension strut cartridge upper cover (1).
Air Inlet Grille Panel - Install - Air Inlet Grille Panel Replacement (Trax)Air Inlet Grille Panel Replacement (Encore)
Measure and adjust the wheel alignment. Wheel Alignment Measurement