LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (12 V Starting And Charging System) >> Repair Instructions >> Battery Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4774854

    Battery(1) - Install

  2. GM4774845

    Battery Hold Down Retainer(3) - Install

  3. Battery Hold Down Retainer(1) - Install
    4. CAUTION:

    Refer to Fastener Caution .

  4. Battery Hold Down Retainer Bolt (2) - Install and tighten 22 N.m (16 lb ft)
  5. GM4774820

    Battery Distribution Engine Compartment Fuse Block(3) - Install

  6. Battery Positive Post Clamp Nut(1) - Tighten 4.5 N.m (40 lb in)
  7. Battery Distribution Engine Compartment Fuse Block Cover(2) - Install
  8. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (without KL9) Battery Negative Cable Disconnection and Connection (with KL9) 
scientia non olet · About LEMON Manuals