LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (12 V Starting And Charging System) >> Repair Instructions >> Battery Positive Cable Junction Block Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4751262

    Battery Positive Cable Junction Block (2) - Install

    2. CAUTION:

    Refer to Fastener Caution

  2. Battery Positive Post Clamp Nut(1) - Tighten 4.5 N.m (40 lb in)
  3. GM4751260

    Body Harness (3) - Install

  4. Body Harness Terminal Nut (4) - Tighten 6 N.m (53 lb in)
  5. Battery Positive Cable(2) - Install
  6. Battery Positive Cable Nut(1) - Install and tighten 9 N.m (80 lb in)
  7. Battery Positive Cable(5) - Install
  8. Battery Positive Cable Nut(6) - Install and tighten 12 N.m (106 lb in)
  9. Electrical Connector(7) - Connect[2x]
  10. GM4751259

    Battery Positive Cable Junction Block Cover (1) - Install

  11. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (without KL9) Battery Negative Cable Disconnection and Connection (with KL9) 
scientia non olet · About LEMON Manuals