LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Trax LS, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Hydraulic Brake System) >> Repair Instructions >> Brake Fluid Level Indicator Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the master cylinder reservoir, if removed. Refer to Brake Master Cylinder Reservoir Replacement .
  2. GM2910018

    Install the brake fluid level indicator switch (1) by pressing the switch firmly into the brake master cylinder reservoir.

  3. Connect the brake fluid level indicator switch electrical connector.
scientia non olet · About LEMON Manuals