LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Trax LS, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (12 V Starting And Charging System) >> Repair Instructions >> Battery Current Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2027819

    Install the current sensor (2) to the battery negative cable (1).

    NOTE:

    Note the orientation of the battery current sensor.

  2. Install the battery negative cable. Refer to Battery Negative Cable Replacement (without KL9) Battery Negative Cable Replacement (with KL9) .
scientia non olet · About LEMON Manuals