Installation Procedure
- Apply a light coat of wheel speed sensor anti-corrosion grease to the wheel speed sensor and mounting pad on the wheel hub and bearing assembly. Adhesives, Fluids, Lubricants, and Sealers
Wheel Speed Sensor (1) - Install
- CAUTION:
Wheel Speed Sensor Bolt (1) - Install and tighten to 13 N.m (115 lb in)
Wheel Speed Sensor Harness Clip (1) - Secure
Wheel Speed Sensor Harness Clip (1) - Secure
Wheel Speed Sensor Harness Clip (1) - Secure
- Wheel Speed Sensor Harness Clip (2) - Secure
- Wheel Speed Sensor Electrical Connector - Connect
- Perform the vehicle diagnostic system check. Diagnostic System Check - Vehicle