LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Spark LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Object Detection System) >> Diagnostic Information and Procedures >> DTC B096C or B096D: Parking Assist Side Sensor Circuit >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify DTC B1405 is not set.
    • If the DTC is not set 
  3. Verify DTC B096C 01, B096D 01, B096C 21 or B096D 21 is not set.
    • If any of the DTCs are set 
    1. Verify none of the B94 Side Object Sensors - Front are contaminated with snow, mud, dirt, slush or ice.
      • If contaminated, clean the B94 Side Object Sensors - Front.
      • If there is no contamination.
    2. Refer to Circuit/System Testing.
    • If none of the DTCs are set 
  4. Verify that DTC B096C 3A or B096D 3A is not set.
    • If any of the DTCs are set 

      Replace the appropriate B94 Side Object Sensor - Front with the correct sensor type.

    • If none of the DTCs are set 
  5. Ignition ON.
  6. Verify the scan tool Parking Assist System Status parameter is Enabled.
    • If the Parking Assist System Status parameter is Disabled 

      Refer to Circuit/System Testing.

    • If the Parking Assist System Status parameter is Enabled 
  7. All OK.
scientia non olet · About LEMON Manuals