Installation Procedure
WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
Install a NEW wheel stud to the wheel hub.
- Add enough washers (3) in order to draw the stud into the wheel hub.
- Install the wheel nut (1).
- Tighten the wheel nut until the head of the wheel stud is fully seated against the back of the wheel hub flange (2).
- Remove the wheel nut (1) and the washers (3).
- Install the front brake rotor. Refer to Front Brake Rotor Replacement .
- Install the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
- Lower the vehicle.