LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Cruze Premier, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Disc Brake System) >> Repair Instructions >> Front Brake Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
  1. raise and suitably support the vehicle. refer to Lifting and Jacking the Vehicle .
  2. remove the Brake Rotor. refer to Front Brake Rotor Replacement .
  3. GM2027678

    remove the wheel speed sensor bolt (1).

  4. remove the wheel speed sensor (2).
  5. remove the wheel speed sensor wiring harness from the steering knuckle.
  6. remove the wheel drive shaft from the wheel bearing/hub. refer to Front Wheel Drive Shaft Replacement .
  7. GM2027684

    remove and DISCARD the wheel bearing/hub mounting bolts (1).

  8. GM2027685

    remove the wheel bearing/hub (1) and front brake shield (2) from the steering knuckle.

scientia non olet · About LEMON Manuals