LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Cruze Premier, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Disc Brake System) >> Repair Instructions >> Front Brake Rotor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
  1. If installing a NEW Brake Rotor, clean the friction surfaces of the Brake Rotor with denatured alcohol.
  2. Using the CH-42450-A  hub resurfacing kit, thoroughly clean any rust or corrosion from the mating surface of the hub/axle flange.
  3. Using the CH-41013  rotor resurfacing kit, thoroughly clean any rust or corrosion from the mating surface of the rotor to the hub/axle flange.
  4. GM2332713

    Brake Rotor (1) - Install

  5. GM2332712
    CAUTION:

    Fastener Caution

    Bolt (1) - Install and tighten 9 N.m (80 lb in).

  6. Install the brake caliper and bracket assembly.
  7. GM2027372

    Bolt (1) @ Brake Caliper - Install and tighten [2x] - Use NEW bolts.

    1. First Pass: 150 N.m (111 lb ft)
    2. Final Pass:45 - 60 degrees 
  8. Install the tire and wheel assembly. Tire and Wheel removal and Installation
  9. Burnish the brake pads and rotors. Brake Pad and rotor Burnishing 
scientia non olet · About LEMON Manuals