LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Cruze LS, 4D Sedan, Automatic CVT Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Starting System And Charging System >> Repair Instructions >> Multifunction Power Supply Converter Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection 
  2. GM4375936Courtesy of GENERAL MOTORS COMPANY

    Radio Rear Compartment Speaker (3) - Remove - Radio Rear Compartment Speaker Replacement

  3. GM4849182Courtesy of GENERAL MOTORS COMPANY

    Battery Positive Cable Terminal Cover (1) - Remove

  4. Unlock the retaining tabs.
  5. GM4850210Courtesy of GENERAL MOTORS COMPANY

    Battery Positive Cable Bolt (2) - Remove

  6. Battery Positive Cable (1) - Remove
  7. Unlock the retaining tabs.
  8. GM4850211Courtesy of GENERAL MOTORS COMPANY

    Remove the battery positive cable terminal (1).

  9. Unlock the retaining tabs.
  10. GM4850212Courtesy of GENERAL MOTORS COMPANY

    Disconnect the electrical connectors. (1)

  11. GM4850214Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) - Remove [2x]

  12. GM4850215Courtesy of GENERAL MOTORS COMPANY

    Electrical Connector (1) - Unclip

  13. GM4850217Courtesy of GENERAL MOTORS COMPANY

    Electrical Connector (1) - Disconnect

  14. Electrical Connector (2) - Disconnect
  15. GM4850218Courtesy of GENERAL MOTORS COMPANY

    Fuel Pump Power Control Module Bracket (1) - Remove

  16. Unlock the retaining tabs.
  17. GM4850220Courtesy of GENERAL MOTORS COMPANY

    Multifunction Power Supply Converter (1) - Remove