Installation Procedure
Generator (2) - Install
- Install the 2 generator bolts (3) and tighten to 22 N.m (16 lb ft).
- Install the generator nut (1) and tighten to 22 N.m (16 lb ft).
Install the generator and starter cable (3).
- Install the generator and starter cable generator lead nut (2) and tighten to 12.5 N.m (111 lb in).
- Connect the generator wiring harness plug (1)
- Exhaust Front Pipe Replacement (1.4L LE2) - Install
- Lower the vehicle.
- Drive Belt Replacement - Install
- Battery Negative Cable Disconnection and Connection - Connect
CAUTION:
Refer to Fastener Caution .