LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Cruze L >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Starting System And Charging System >> Repair Instructions >> Battery to Fuse Block Cable Replacement >> Installation Procedure

Installation Procedure

  1. GM3684335Courtesy of GENERAL MOTORS COMPANY

    Install the battery to fuse block cable (1).

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the battery positive cable to fuse block nut (5) and tighten to 15N.m (11 lb ft).
  3. Install the body extension wiring harness (2).
    4. NOTE:

    Counterhold the battery positive clamp.

  4. Install the body extension wiring harness bolt (3) and tighten to 9N.m (80 lb in).
  5. Tighten the battery positive cable nut (4) to 4.5N.m (40 lb in).
  6. GM3684334Courtesy of GENERAL MOTORS COMPANY

    Install the fuse block cover (2). Install the rear fuse block cover retainers (2) to the fuse block.

  7. Lock the 3 retaining tabs (3) into the battery fuse block cover.
  8. Fold the rear seat back cushion in original position.
  9. Close the left rear door.
  10. Rear Compartment Floor Panel Trim Support - Install
  11. Rear Compartment Floor Panel Trim - Install
  12. Battery Negative Cable Disconnection and Connection  - Connect
scientia non olet · About LEMON Manuals