Removal Procedure

WARNING:

CAUTION:

Battery Negative Cable - Disconnect - Battery Negative Cable Disconnection and Connection
Dash Upper Extension Panel Opening Cover - Remove - Dash Upper Extension Panel Opening Cover Replacement
Courtesy of GENERAL MOTORS COMPANY

Radiator Surge Tank Bracket Clip (2) - Remove

NOTE:

Do NOT disconnect the engine coolant hoses.

Radiator Surge Tank (1) - Reposition away
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Cap the brake pipe fitting and plug the brake master cylinder outlet port to prevent brake fluid loss and contamination.

Brake Pressure Modulator Valve Secondary Pipe (1) @ Brake Pressure Modulator Valve (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Brake Pressure Modulator Valve Primary Pipe (1) @ Brake Pressure Modulator Valve (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Electrical Connector (2) @ Electronic Brake Control Module (1) - Disconnect
Unclip the wiring harness from the brake pressure modulator valve bracket.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Cap the brake pipe fittings to prevent brake fluid loss and contamination.

Brake Pipe Fitting (2) - Loosen [4x]
Bolt (1) - Remove
Remove the electronic brake and traction control module and brake pressure modulator valve (3) along with the brake pressure modulator valve bracket from the vehicle.
Brake Pressure Modulator Valve Bracket - Remove - Brake Pressure Modulator Valve Bracket Replacement