Removal Procedure

Turn on the radio and record all of the customer radio station presets.
Ensure that all lamps and accessories are turned off.
Turn the ignition OFF and remove the ignition key.
Open the rear compartment lid.
Rear Compartment Floor Panel Trim - Remove
Rear Compartment Floor Panel Trim Support - Remove
Open the right rear door.
Fold the rear seat back cushion forward to get a better access to the battery.
Courtesy of GENERAL MOTORS COMPANY

WARNING:
Refer to Battery Disconnect Warning .

Loosen the battery negative pole nut (2).
Disconnect the wiring harness plug (1) from the battery sensor.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Use a counterholder to prevent damage at the battery sensor.

Install a open-end spanner (1) to counterhold the battery sensor as shown in the graphic.
Remove the battery negative cable nut (2).
Remove the battery negative cable. (3)
Courtesy of GENERAL MOTORS COMPANY

Remove the battery sensor (1).