Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Fuse Block Access Hole Cover (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Remove the bolt (1).
Release the 5 retaining tabs (2).
Remove the left and right front floor console extension panel (3).
Courtesy of GENERAL MOTORS COMPANY

Remove the left and right instrument panel fuse block access cover frame (1).
Courtesy of GENERAL MOTORS COMPANY

Remove the bolt (1).
Remove the 4 retaining clips (2).
Remove the instrument panel lower trim panel insulator (3).
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Airbag Nut (1) - Remove
Instrument Panel Lower Airbag - Passenger Side (2) - Remove
Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Outer Trim Cover - Right Side (2) - Remove
Unlock the retaining tabs. (1)
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Compartment Bolt (1) - Remove [5x]
Instrument Panel Compartment (2) - Remove
Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Human Machine Interface Control Module Bracket Bolt (1)@Human Machine Interface Control Module Bracket (2) - Remove
Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Human Machine Interface Control Module Bracket Bolt (1)@Human Machine Interface Control Module Bracket (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Human Machine Interface Control Module Bracket (1) - Remove
Transfer components as necessary.