Installation Procedure
Position a NEW steering gear boot inner clamp (1) loosely on the steering gear boot (2).
- Position the steering gear boot (2) on the steering gear.
- Partially lower the vehicle.
- From the engine compartment, use the CH-22610 pliers to tighten the NEW steering gear boot inner clamp (1).
- Raise the vehicle.
Steering Gear Boot Outer Clamp (2) - Install
- Steering Linkage Inner Tie Rod Nut (1) - Install
- Steering Linkage Outer Tie Rod - Install - Steering Linkage Outer Tie Rod Replacement
- If servicing the right side steering gear boot, install the air cleaner assembly. Air Cleaner Assembly Replacement (LT1)Air Cleaner Assembly Replacement (LT4)Air Cleaner Assembly Replacement (LT5)
- If servicing the left side steering gear boot, install the air cleaner outlet duct. Air Cleaner Outlet Duct Replacement (LT1)Air Cleaner Outlet Duct Replacement (LT4)Air Cleaner Outlet Duct Replacement (LT5)