Pedestrian Impact Detection Sensor Replacement - Front Upper Beam

WARNING: This page is about a different car, the 2018 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedures Disable the pedestrian impact detection system. Pedestrian Impact Detection System Disabling and Enabling Front Bumper Fascia Energy Absorber Replacement (Base, Uplevel)Front Bumper Fascia Energy Absorber Replacement (ZL1)
1	Pedestrian Impact Detection Sensor Procedure Disconnect the electrical connector. Carefully remove the pedestrian impact detection sensor from the front bumper fascia energy absorber. Enable the pedestrian impact detection system. Pedestrian Impact Detection System Disabling and Enabling NOTE: Inspect the absorber / EA foam for any cracks or damage and inspect pedestrian sensor tube for any cuts or puncture holes. Replace front bumper fascia or sensor system if any damage is found. This can cause faulty readings with the pedestrian impact sensor. The pedestrian sensor is a press fit into the absorber.

Callout

Component Name

Preliminary Procedures

Disable the pedestrian impact detection system. Pedestrian Impact Detection System Disabling and Enabling
Front Bumper Fascia Energy Absorber Replacement (Base, Uplevel)Front Bumper Fascia Energy Absorber Replacement (ZL1)

Pedestrian Impact Detection Sensor

Procedure

Disconnect the electrical connector.
Carefully remove the pedestrian impact detection sensor from the front bumper fascia energy absorber.
Enable the pedestrian impact detection system. Pedestrian Impact Detection System Disabling and Enabling

NOTE:

Inspect the absorber / EA foam for any cracks or damage and inspect pedestrian sensor tube for any cuts or puncture holes.
Replace front bumper fascia or sensor system if any damage is found. This can cause faulty readings with the pedestrian impact sensor.
The pedestrian sensor is a press fit into the absorber.