Installation Procedure
Clean the intake manifold mating surfaces. (2)
- Throttle Body Gasket (1) - Install NEW
Throttle Body (3) - Install
- Throttle Body Bolt (1) - Install and tighten [4x] 10 N.m (89 lb in)
- Electrical Connector (2) - Connect
- Air Cleaner Outlet Duct - Install - Air Cleaner Outlet Duct Replacement
- Dash Upper Extension Panel Opening Cover - Install - Dash Upper Extension Panel Opening Cover Replacement
- Enable the high voltage system. High Voltage Enabling
- Perform the throttle body idle air flow compensation reset. Throttle Body Idle Air Flow Compensation Reset
CAUTION:
Refer to Fastener Caution .