Installation Procedure
Mass Airflow Sensor (1) - Install
- Mass Airflow Sensor Bolt (2) - Install and tighten [2x] 2.5 N.m (22 lb in)
Air Cleaner Upper Housing (2) - Install
- Air Cleaner Upper Housing Bolt (1) - Install and tighten [5x] 2.5 N.m (22 lb in)
Air Cleaner Outlet Duct (3)@Air Cleaner Assembly (4) - Install
- Air Cleaner Outlet Duct Clamp (2) - Tighten 2.5 N.m (22 lb in)
- Connect the electrical connector. (1)
- When the replacement is completed, use a scan tool to perform the appropriate reset functions. Control Module References
CAUTION: