Removal Procedure
- Relieve the fuel system pressure. Fuel Pressure Relief
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Air Inlet Grille Panel - Remove - Air Inlet Grille Panel Replacement
- Intake Manifold Cover - Remove - Intake Manifold Cover Replacement
- Air Cleaner Outlet Duct - Remove - Air Cleaner Outlet Duct Replacement
Wiring Harness Clip (3) - Unclip
- Air Cleaner Resonator Bracket Bolt (1) - Remove
- Air Cleaner Resonator Bracket (2) - Remove
Disconnect the fuel feed front pipe (2) at the fuel injection pump (1) and reposition.
- Close all open connections with the EN-6015 plugs.
Disconnect the electrical connector. (1)
- Remove the manifold absolute pressure sensor bolt. (2)
- Remove the manifold absolute pressure sensor. (3)
- Remove the seal ring. (4)