Removal Procedure

WARNING:

CAUTION:

When working on the fuel rail and fuel injectors, always maintain a clean work surface. Failure to maintain a clean work surface can result in contaminant on the injector seals and cause leaks.

Fuel Injection Fuel Rail Assembly Removal and Installation - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
The EN-51146 - 2 - 5 calibrations tools must be installed.

Remove the 8 plate bolts (1) and remove the EN-51146-1-2 plate (2), counterhold with a wrench (4) at the EN-51146-1-1 supports (3).
Remove the 8 EN-51146-1-1 supports (3).
Courtesy of GENERAL MOTORS COMPANY

Fuel Injector Wiring Harness (2) - Disconnect [4x]
Fuel Injector (3)@Fuel Injection Fuel Rail (1) - Remove [4x]
Courtesy of GENERAL MOTORS COMPANY

O-Ring (1)@Fuel Injector (2) - Remove and DISCARD [4x]

Cleaning Procedure

Clean the fuel injector bores. If the fuel injectors will be reused, clean the fuel injectors. Fuel Injection Fuel Rail Assembly Removal and Installation .
Inspect the NEW fuel injector. Fuel Injection Fuel Rail Assembly Removal and Installation .