Installation Procedure
Install the fuel feed pipe (2) to the vehicle.
- Fuel Feed Pipe (2)@Retainer (1) - Install [3x]
- Close the 3 retainers (1).
Fuel Feed Pipe (1)@Retainer (2) - Install
- Remove all EN-6015 plugs from the connections.
- Fuel Feed Pipe (1)@Fuel Pump Fuel Feed Hose (3) - Connect- Plastic Collar Quick Connect Fitting Service
- Close the retainer (2).
Connect the electrical connector. (2)
- Fuel Feed Pipe (3)@Retainer (1) - Install
- Close the retainer (1).
Fuel Feed Pipe (2)@Retainer (1) - Install [2x]
- Close the 2 retainers (1).
- Drivetrain and Front Suspension Cradle Replacement - Install
- Underbody Front Air Deflector Replacement - Left Side - Install
- Underbody Rear Air Deflector Replacement - Install
- Lower the vehicle.
Fuel Feed Pipe (2)@Retainer (1) - Install
- Close the retainer (1).
- Remove all EN-6015 plugs from the connections.
- Fuel Feed Front Pipe (3)@Fuel Feed Pipe (2) - Connect - Metal Collar Quick Connect Fitting Service
- Battery Negative Cable Disconnection and Connection - Connect
- Cycle the ignition to run the fuel pump and check for fuel leaks.