Removal Procedure
WARNING:
Refer to Diesel/Gasoline Vapors Warning .
WARNING:
Refer to Safety Goggles and Fuel Warning .
- Relieve the fuel system pressure. Fuel Pressure Relief
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Intake Manifold Cover - Remove - Intake Manifold Cover Replacement
- Air Cleaner Outlet Duct - Remove - Air Cleaner Outlet Duct Replacement
Wiring Harness Clip (3) - Unclip
- Remove the air cleaner resonator bracket bolt (1).
- Remove the air cleaner resonator bracket (2).
- NOTE:
Lay a lint-free cloth under the fuel feed intermediate pipe to absorb any excess fuel spillage.
Remove the fuel feed intermediate pipe bolt (1).
- Loosen the fuel feed intermediate pipe fittings (2, 5) at the fuel injection fuel rail (3) and the fuel pump (4).
- Remove and DISCARD the fuel feed intermediate pipe (6).
NOTE:
High pressure fuel feed pipes are one time use only. ALWAYS install a NEW high pressure fuel feed pipe if the pipe is removed OR the fittings are loosened.