LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Volt Premier >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel System- - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Exhaust Gas Recirculation Valve Replacement >> Removal Procedure

Removal Procedure

  1. Exhaust Gas Recirculation Cooler Temperature Sensor Replacement - Position 1  - Remove
  2. Drain the cooling system. Cooling System Draining and Filling
  3. GM4091546Courtesy of GENERAL MOTORS COMPANY

    Engine Wiring Harness Bracket Bolt (1) - Remove

  4. Engine Wiring Harness Bracket Nut (3) - Remove
  5. Engine Wiring Harness Bracket (4) - Position aside
  6. Disconnect the electrical connector. (2)
  7. GM4091548Courtesy of GENERAL MOTORS COMPANY

    Clamp (6) - Loosen

  8. Exhaust Gas Recirculation Valve Cooling Return Hose (5) - Disconnect
  9. Exhaust Gas Recirculation Cooler Bolt (4) - Remove [2x]
  10. Exhaust Gas Recirculation Valve Bolt (2, 3) - Remove [3x]
  11. GM4091549Courtesy of GENERAL MOTORS COMPANY

    Exhaust Gas Recirculation Valve (1) - Remove

  12. Gasket (2, 3) - Remove [2x]
scientia non olet · About LEMON Manuals