Installation Procedure
Assemble the Front Floor Console Accessory Bracket (2) to the Wireless Charging System Module (3).
- Front Floor Console Bracket Bolt (1) - Install and tighten [4x] 1 N.m (9 lb in)
Connect the Front Floor Console Housing Assembly (1) to the Radio Cooling Duct (2).
- Connect the electrical connector.
Front Floor Console Bracket Bolt (1) - Install and tighten [4x] 2.5 N.m (22 lb in)
- Front Floor Rear Console Side Trim Panel Replacement - Right Side - Install
- Front Floor Rear Console Side Trim Panel Replacement - Left Side - Install