LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax LT, FWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls And Fuel - 1.4L (LUV) - Repair Instructions >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement (AWD) >> Installation Procedure

Installation Procedure

  1. GM2772362

    Install a NEW fuel tank fuel pump module O-ring gasket (1) to the fuel tank fuel pump module (2).

  2. GM2772310

    Lower the fuel pump module (2) into the fuel tank while connecting the fuel tank vent pipe (1) to the fuel pump module.

  3. GM2770610

    Install the fuel tank fuel pump module lock ring (1) to the fuel tank (2).

  4. Using the CH-45722  Fuel Pump Locking Ring Wrench and a long breaker-bar, rotate the fuel pump module lock ring (1) in a clockwise direction in order to lock the lock ring.
  5. Install the EVAP system hoses.
  6. Install the fuel feed pipe.
  7. Connect the electrical connector.
  8. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement (AWD) .
  9. Install the fuel tank.
scientia non olet · About LEMON Manuals