LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Traverse RS >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Antilock Brake System) >> Diagnostic Information and Procedures >> DTC C0561 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify that DTC C0561 is not set.
    • If the DTC is set 
    1. Reprogram the K17 Electronic Brake Control Module. Refer to Control Module References .
    2. Verity DTC C0561 is not set.
      • If the DTC is set, replace the K17 Electronic Brake Control Module.
      • Go to next step: If the DTC is not set
    3. All OK.
    • Go to next step: If the DTC is not set 
  3. All OK.