Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Perform the following steps to install the steering wheel spoke cover (1):
1. Connect the electrical connectors.
2. Secure the steering wheel spoke cover, cruise control switch, and radio control switch to the steering wheel.
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Steering Wheel Spoke Cover Fastener-Right Rear (1) - Install and tighten 2.5 N.m (22 lb in)
Courtesy of GENERAL MOTORS COMPANY

Radio Control Switch - Steering Wheel-Right Rear (1) - Install - Radio Control Switch Replacement - Steering Wheel (Right Rear)
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Spoke Cover Fastener-Left Rear (1) - Install and tighten 2.5 N.m (22 lb in)
Courtesy of GENERAL MOTORS COMPANY

Radio Control Switch - Steering Wheel-Left Rear (1) - Install - Radio Control Switch Replacement - Steering Wheel (Left Rear)
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Airbag (1) - Install - Steering Wheel Airbag Replacement