Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Trim Pad - Left Side (1) - Remove - Instrument Panel Trim Pad Replacement - Left Side
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Trim Pad - Right Side (1) - Remove - Instrument Panel Trim Pad Replacement - Right Side
Instrument Panel Radio Front Trim Plate - Remove - Instrument Panel Radio Front Trim Plate Replacement (RPO IOA) , or Instrument Panel Radio Front Trim Plate Replacement (RPO IO5, IO6)
Courtesy of GENERAL MOTORS COMPANY

Heater and Air Conditioning User Interface Control (2) - Remove - Heater and Air Conditioning User Interface Control Replacement
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Knee Bolster (1) - Remove - Instrument Panel Knee Bolster Replacement
Courtesy of GENERAL MOTORS COMPANY

Slide the front floor console (1) back to clear the pins from the instrument panel assembly.
Front Floor Console - Remove - Front Floor Console Replacement
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Compartment Door Opening Frame Bolt (1) - Remove [7x]
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Compartment Door Opening Frame Bolt (1) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Compartment Door Opening Frame Bolt (1) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Compartment Door Opening Frame (1) - Remove
Use a plastic trim tool if necessary.
Disconnect the electrical connectors.
Transfer components as necessary.