Component Testing
- Ignition OFF, disconnect the harness connector at the S70L Steering Wheel Controls Switch - Left.
- Test for infinite resistance between the following signal terminals and the ground terminal 6 with the switch in the open position.
- Terminal 1
- Terminal 3
- If less than infinite resistance on either circuit
Replace the S70L Steering Wheel Controls Switch - Left.
- Go to next step: If infinite resistance
- Test for less than 10 Ω between the following signal terminals and the ground terminal 6 with the S70L Steering Wheel Controls Switch - Left in the Speak position or Mute position.
- Terminal 1
- Terminal 3
- If 10 Ω or greater
Replace the S70L Steering Wheel Controls Switch - Left.
- Go to next step: If less than 10 Ω
- All OK