LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Traverse Premier, FWD >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Power Transfer Unit/Transfer Case - GKN 761 >> Repair Instructions - On Vehicle >> Power Transfer Unit Case Fluid Replacement >> Installation Procedure

Installation Procedure

  1. GM4288856
    CAUTION:

    Refer to Component Fastener Tightening Caution .

    Install a NEW drain plug (2) and seal and tighten to 39 N.m (29 lb ft).

  2. Fill the transfer case to the bottom of the fill plug hole with the recommended fluid. Refer to Adhesives, Fluids, Lubricants, and Sealers , and Approximate Fluid Capacities .
  3. Install a NEW fill plug (1) and seal and tighten to 39 N.m (29 lb ft).
  4. Inspect the cross member to ensure that no oil has drained into the cross member cavity. Clean the cross member if necessary.
scientia non olet · About LEMON Manuals