LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Traverse LS, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L (LFY) - Repair Instructions >> Repair Instructions >> Engine Rear Noise Shield Replacement >> Removal Procedure

Removal Procedure

WARNING:

The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death.

  1. GM4756825

    Separate the engine wiring harness retainers (1) from the intake manifold.

  2. Reposition the engine wiring harness (2).
  3. GM4756827

    Remove the engine rear noise shield bolt (1).

  4. Remove the engine rear noise shield retainer (2).
  5. GM4756830

    Remove the engine rear noise shield (1).

scientia non olet · About LEMON Manuals