Rear Camber Adjustment
WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.
Rear Suspension Lower Control Arm Inner Nut (1) - Loosen
Rotate the rear suspension lower control arm adjust bolt (1) until the correct camber measurement is achieved. Wheel Alignment Measurement
NOTE:Tighten the nut and bolt enough to maintain the adjustment. Verify the camber reading prior to tightening the bolt to its final torque.
- CAUTION:
Refer to Fastener Caution .
Hold the rear suspension lower control arm adjust bolt and tighten the rear suspension lower control arm inner nut (1). Lower Control Arm Replacement
- Check the alignment specification and readjust if necessary. Wheel Alignment Specifications