Sunshade Support Replacement

WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures It is only necessary to lower the headlining. Only do those steps in the headlining procedure that will allow access to the component being removed. Unclip the sunshade and rotate the sunshade to the side.
1	Sunshade Support Fastener CAUTION: Fastener Caution Procedure Use a small flat-bladed tool to open the sunshade support bolt cover to access the fastener. Tighten 2 N.m (18 lb in)
2	Sunshade Support Procedure Using the appropriate tool, release the metal sunshade support retainer.

Callout

Component Name

Preliminary Procedures

It is only necessary to lower the headlining. Only do those steps in the headlining procedure that will allow access to the component being removed.
Unclip the sunshade and rotate the sunshade to the side.

Sunshade Support Fastener

CAUTION:

Fastener Caution

Procedure
Use a small flat-bladed tool to open the sunshade support bolt cover to access the fastener.
Tighten
2 N.m (18 lb in)

Sunshade Support
Procedure
Using the appropriate tool, release the metal sunshade support retainer.