Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Front Side Door Access Hole Cover (1) - Remove

NOTE:

USE HAND TOOL ONLY. Using a battery operated gun or power tool can BREAK the component.
Around 10 - 12 rotations is enough to allow the Front Side Door Outside Handle Lock Cylinder to be removed.

Front Side Door Outside Handle Lock Cylinder Screw (2) - Loosen
Courtesy of GENERAL MOTORS COMPANY

Pull the door handle (1) out to the open position.
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Lock Cylinder Bezel (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using the appropriate tool, remove the front side door lock cylinder opening cover (1) from the lock cylinder insulator. (2)