LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Traverse L >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Vehicle Access System) >> Diagnostic Information and Procedures >> DTC B396E - Liftgate Close Switch Malfunction >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition/Vehicle - Off
  2. Disconnect the electrical connector: B70 Liftgate Close Switch
  3. Test for infinite resistance between the test points: Signal terminal 3 & Low Reference terminal 4 - Switch - Not Pressed
    • If less than infinite resistance 

      Replace the component: B70 Liftgate Close Switch

    • Go to next step: If infinite resistance 
  4. Test for less than 3 ohms between the test points: Signal terminal 3 & Low Reference terminal 4 - Switch - Pressed
    • If 3 ohms or greater 

      Replace the component: B70 Liftgate Close Switch

    • Go to next step: If less than 3 ohms 
  5. All OK.