LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Traverse L >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Supplemental Restraints System) >> Diagnostic Information and Procedures >> DTC B0082 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition On/Vehicle in Service Mode.
  2. With passenger seat empty, verify the scan tool Passenger Seat Occupancy Status parameter is Empty Seat.
    • If scan tool Passenger Seat Occupancy Status parameter is not Empty Seat 

      Refer to Circuit/System Testing.

    • Go to next step: If scan tool Passenger Seat Occupancy Status parameter is Empty Seat 
  3. With the passenger seat occupied, verify the scan tool Passenger Seat Occupancy Status parameter is Occupied.
    • If scan tool Passenger Seat Occupancy Status parameter is not Occupied 

      Refer to Circuit/System Testing.

    • Go to next step: If scan tool Passenger Seat Occupancy Status parameter is Occupied 
  4. All OK.
scientia non olet · About LEMON Manuals